Holes and Knockouts – Pipes, connectors

To create knockout holes in electrical panels, several tools are recommended:

1. Hydraulic punch set: This is one of the best tools for creating clean, precise holes in electrical panels. It consists of a hydraulic pump, punch dies, and draw studs6.
2. Knockout punch set: These manual punch sets are effective for creating accurate holes in electrical panels. They come in various sizes and can punch through mild steel, aluminum, fiberglass, and plastic23.
3. Hole saws: These are suitable for drilling holes in panels and come in sizes corresponding to standard knockout sizes4.
4. Electrical panel knockout kit: This specialized tool is designed to open knockouts without damaging the panel or surrounding drywall1.

To measure the correct size for a knockout hole in a panel:

1. Determine the trade size of the conduit or connector you’ll be using. This is the standard label used in the electrical industry.
2. Refer to a knockout size chart or guide to find the corresponding hole size for your trade size. For example:
   • 1/2″ trade size requires a 7/8″ (22.5mm) hole
   • 3/4″ trade size requires a 1-1/8″ (28.3mm) hole
   • 1″ trade size requires a 1-3/8″ (34.6mm) hole4
3. Use precise measuring tools like a tape measure or caliper to mark the center point of the hole on the panel.
4. Consider using a center punch to create a small indentation at the marked point, which will help guide your drill bit or punch tool6.
5. For multiple knockouts, you can use a layout tool like the Center Point Knockout Layout Tool to quickly and accurately mark the centers of desired conduits5.

Remember to always follow safety guidelines and use appropriate personal protective equipment when working with electrical panels and tools.

For beginners creating knockout holes, there are several recommended tools that are easier to use and more affordable:

1. Manual knockout punch set: This is a good starting point for beginners. It’s less expensive than hydraulic options and allows you to get familiar with the process12.
2. Hole saws: These are versatile and can be used for various materials. They’re a good option for beginners who may not be ready to invest in a specialized knockout tool2.
3. Step bits: These are useful for making smaller holes and can be a good addition to a beginner’s toolkit2.
4. Greenlee Slug-Buster Knockout Punch Set: This manual set is often recommended for its ease of use and effectiveness3.
5. Klein Tools Knock-Out Punch Set: This is another manual option that’s great for beginners working on smaller projects, like adding a circuit to a box7.

When starting out, it’s important to practice proper alignment and technique. Many knockout sets come with alignment markings or crosshairs to help ensure accurate hole placement12. As you gain experience, you can consider upgrading to more advanced tools like hydraulic or battery-powered knockout sets.

Remember to always prioritize safety and follow manufacturer instructions when using any hole-making tools.

---

For beginner-friendly knockout tools that are lightweight and easy to use, consider the following options:

Tool	Features	Weight/Design	Ease of Use
Greenlee 7238SB Slug-Buster Kit	Manual punch set for 1/2″ to 2″ holes, alignment markings for accuracy	Compact and lightweight	Simple manual operation with included wrench
Pittsburgh Knockout Punch Kit	Affordable manual kit for punching holes in steel, aluminum, and plastic	Lightweight 10-piece kit	Ideal for basic tasks; easy for beginners
Klein Tools Knockout Punch Set with Wrench3	Includes punches, dies, and ratcheting wrench for 1/2″ to 2″ holes	Compact design; cuts up to 10-gauge steel	Clean and accurate punching with manual control
iTOOLco Gear Punch Kit2	Works with any drill, punches 1/2″ to 4″ holes, lifetime warranty on draw studs	Lightweight and drill-compatible	Easy setup with Center Point alignment tool

Manual knockout punch kits like the Greenlee or Pittsburgh are cost-effective and beginner-friendly. For added convenience with a drill, the iTOOLco Gear Punch Kit is a versatile option.

---

Based on the search results, the most versatile knockout tool for different materials appears to be the Milwaukee M18 FORCE LOGIC Knockout Tool. Here’s why:

1. Material versatility: It can punch holes in various materials, including mild steel, stainless steel, aluminum, brass, copper, fiberglass, and plastics13.
2. Punching capacity: The tool can punch up to 4″ holes in 14 gauge mild steel, making it suitable for a wide range of applications4.
3. Power and force: It delivers up to 10 tons of hydraulic force, enough to punch through tough materials like stainless steel3.
4. Cordless design: Being battery-powered, it offers more flexibility and portability for working in different environments and tight spaces3.
5. Quick Connect system: This feature simplifies setup and ensures accurate alignment, making it easier to work with different materials and hole sizes3.
6. Compatibility: The tool is part of Milwaukee’s M18 battery platform, which adds to its versatility across different job sites and applications3.

While other tools like the Greenlee knockout sets also offer versatility, the Milwaukee M18 FORCE LOGIC Knockout Tool stands out for its combination of power, portability, and ability to work with a wide range of materials and hole sizes.